Increasing Water Pressure in Handheld Showers

0
1398

Handheld showers are great for saving space and money. However, if you have ever used a shower head then you know that there can be some issues with water pressure. The lack of pressure can be frustrating and make your showering experience less than enjoyable.

Luckily there are ways to increase the water pressure in your handheld shower head so that you can once again enjoy your morning showers! For example, you can try a black shower head and you will get a different shower experience.

But, before then you may need to know the different factors that determine water pressure in the shower head.

First and most importantly, the diameter of the pipe through which the water flows is a major factor. The greater the diameter of the pipe, the higher the water pressure generated. This is because larger pipes have more room for water to move through them.

Another factor that affects water pressure is the distance between your shower head and your hot water heater or other source of hot water. If there is a lot of distance between these two points, you will experience less pressure than if there is little distance between them. You can reduce this problem by installing an extension pipe between your hot water heater and your shower head so that they are closer together when they are both on.

The type of material used to make your pipes can also affect your shower’s water pressure. Copper pipes tend to be much better at transporting large volumes of water than plastic ones do, so if you have copper piping in your home – and most homes do – then you should see less variation in pressure when compared with a home with plastic piping only.

Finally, check out how many other people are using hot water at any given time; if there are many people using hot showers simultaneously, then there might be a reduced pressure.

How to Increase Water Pressure in a Handheld Shower Head

Use a Shower Head Filter

The first thing to try if you want better water pressure in your handheld shower is installing a shower head filter. These filters attach directly onto your existing shower head and help block out sediment, chlorine and other contaminants from entering the water stream. They also remove odours and improve the taste of your water, making it more enjoyable for bathing or washing dishes.

Replace Your Old Hose

If your hose has seen better days or has become cracked or split from frequent use, replace it with a new one made from high-quality materials like silicone or stainless steel. These hoses will last longer than standard rubber hoses and give you more control over where the water flows when using your handheld showerhead.

Adjust Your Flow Restrictor Valve

If neither of these methods works for you, check the flow restrictor valve on your handheld shower head to see if it needs adjusting or replacing altogether (this is especially common when using older models). A flow restrictor valve limits how much water flows through a handheld shower head, to minimize water usage.

Conclusion

When you take all of the above into consideration, you can see that there is much to consider when you are trying to increase the water pressure in your handheld shower. However, after weighing all the factors and examining both sides of the equation, you should start to see that with enough patience and persistence, even a low water pressure handheld shower can be improved and given more power. If you find it difficult to adjust the pressure, you can seek the help of a plumber or visit Declinko products for a high-end handheld shower head.

LEAVE A REPLY

Please enter your comment!
Please enter your name here